How to tell your stove needs a technician
Stove problems are usually obvious right away — a burner that clicks endlessly without lighting, a flame that's weak or uneven, or an electric coil that stays cold no matter the setting. If one burner behaves differently than the others on the same stove, that's a strong clue the issue is isolated to that burner's parts rather than the whole unit.
What's actually wrongCommon causes of stove problems
Gas and electric stoves fail differently. Here's what we check first, based on your stove type and symptom.
Most often a dirty or moist igniter. Boilovers and grease coat the ceramic tip, which stops it from producing a strong enough spark.
Points to a failed igniter, damaged wiring, or a spark module issue — usually needs a technician to isolate which one.
Often clogged burner ports from food debris, or low gas flow reaching that specific burner head.
Usually a burnt-out heating element. Swapping it with a working burner from another spot confirms whether it's the coil or the socket.
Points to a failed infinite switch, the part that controls how much power reaches the burner at each dial position.
Stop using the burner and ventilate the area. This needs a technician's attention before the stove is used again.
What happens during a stove repair visit
Tell us the symptoms
Which burner, clicking or silent, weak flame or none — describe it when you book.
We diagnose on site
Our technician checks the igniter or element, the switch, and gas or power flow before naming the cause.
You get a clear quote
We explain what's wrong in plain language and quote the fix before any repair work starts.
Repair, test, warranty
We light or heat every burner to confirm the fix before we leave, backed by our workmanship warranty.
Stove brands we repair in Altoona
Our technicians carry parts for the stove brands most common in Altoona kitchens, gas and electric alike.
Related repairsOther appliances we service nearby
Stove repair FAQs
Usually not. It's most often a dirty or moist igniter that just needs cleaning, though a cracked igniter or wiring issue means a replacement part.
Usually a burnt-out heating element. If a working burner also fails to heat in that same socket, the issue is the socket or switch instead of the coil.
Yes, the other burners should be unaffected. It's still worth having the faulty one checked so it doesn't affect the wiring shared with other burners.
It's not dangerous by itself, but if you smell gas along with the clicking, turn off the burner, ventilate the room, and call us right away.
Yes. See our cooktop repair page if your stovetop is a separate built-in unit from your oven.
Burner not lighting? Let's fix that today.
Call now for same-day service in Altoona, or send your details online and we'll confirm a time that works.